Product Overview
Features & Benets
DURAFire® Oil Igniter
e DURAFire® can be used as a Class 1, Class 2, or Class 3 igniter,
depending on the burner capacity. e DURAFire® is easily installed as a retrot
into most burner types based on its size, capacity, and reliable operation.
e DURAFire® oil igniter consists of ve major components: a guide
tube, an atomizer/head assembly, an oil/air mixture transport tube, a spark rod,
and a stainless steel diuser for pilot stabilization. e guide tube houses the
internals, which are attached to the head and easily removed from the guide
tube for maintenance purposes by releasing a “V” band retainer, requiring no
tools. Cooling/combustion airow is directed down the guide tube to support
and maintain the primary combustion zone during operation. is controlled
mixture of fuel and air in the primary combustion zone results in a highly
reliable, stable igniter ame. While out of service, airow cools the igniter and
prevents debris from entering the end of the guide tube.
e DURAFire® oil igniter comes standard with Forney’s High Energy
Spark Igniter (HESI) as the spark source. e HESI produces a powerful 12-
joule spark approximately three times per second at the primary combustion
zone. e HESI spark tip is a nonfouling, surface-gap tip which is replaceable as
a unit by a threaded connection. e remaining HESI components consist of a
positioning rod, cable and power unit. Optional equipment for the DURAFire®
includes mounting hardware, retraction assembly, hoses and ame detector.
e DURAFire® oil igniter delivers the
most reliable source of energy for main
ame ignition, ame stabilization, and
boiler warm-up.
• Class1,2or3oiligniter
Capacity range from 6 to 30 MBtu/hr.
• appliCationFlexibility
e protected primary combustion zone
ensures reliable operation in multiple
environments.
• easyretroFit
With a diameter of only 4 inches, the
DURAFire® ts most burners.
• lowMaintenanCerequireMents
No moving parts, a self-cleaning spark tip
and no tools required to perform periodic
inspection.
• reliableignition
95% ignition rate in most applications.
• HigHeFFiCienCyairatoMizer
e internal mix atomizer is selected from a
standard set of sizes for each project.
• Cooling/CoMbustionair
Low cooling/combustion air requirements.
• Durability
Heavy duty material and no moving parts to
wear out.
• CoMpatibility
Fits most existing mount tubes minimizing
retrot installation costs.
A UTC Fire & Security Company
Forney Corporation • 3405 Wiley Post Road • Carrollton, TX 75006 • 800-356-7740 • Fax 972-458-6650 • www.forneycorp.com
DuraFire_rev11-2011.indd 1 11/15/2011 3:47:40 PM
Comments to this Manuals